The Bacon Bomb is an industrial strength device designed to take fuel samples from the bottom of storage tanks. When the thief strikes the bottom of the tank, a plunger assembly opens to admit the sample. The plunger closes again when the sampler is withdrawn, forming a tight seal. Samples can be taken at any depth with the use of a secondary trip line. The thief is equipped with a plunger locking cam for tight closure during transport.

Obtains fluid samples from hard to reach spots with flexible 1/4" tubing and the FS 100 Fluid Sampling pump. The durability, simplicity, versatility and. operating ease bring a new level of performance to fluid sampling.

No cross contamination. Fluids can be drawn through tubing (FS 120) directly into sampling bottle (FS 110) without coming into contact with the pump. The pump will stay completely clean. The FS system can be used for fuels, oil, hydraulic fluids, coolant, water, etc.

The Algae-X fuel maintenance systems provide reliable fuel by constantly monitoring their performance, and automating the fuel maintenance cycles with our SMART Controllers.

The HMI PLC Touch Screen Controller is a fully automated filtration controller with intuitive setup and system control. It has Modbus, TCP/IP LAN and Internet connectivity. The controller provides E-mail and SMS Maintenance Alerts, a Maintenance Alert Log File and On-screen help. It gives an instant visual status report of system power, pump operations, and alarms for high vacuum, and high water levels.

The Algae-X fuel maintenance systems provide reliable fuel by constantly monitoring their performance, and automating the fuel maintenance cycles with our SMART Controllers.

The SFC-50 is a fully automated filtration controller with digital text readout of alarm system status, and easy to program for scheduled periodic fuel maintenance. Generally for use with our smaller systems such as the FPS systems, the SFC-50 gives an instant visual status report of system power, pump operations, and alarms for high vacuum, and high water levels.

The Algae-X fuel maintenance systems provide reliable fuel by constantly monitoring their performance, and automating the fuel maintenance cycles with our SMART Controllers.

Generally for use with our FPS LX-F systems, the SFC-55 gives an instant visual status report of system power, pump operations, and alarms for high vacuum, high water levels, and leak detection.

The RMS-60 programmable Smart Filtration Controller integrates seamlessly with existing Building Management Systems for onsite and remote monitoring of dual, primary filtration. Remote Filtration Monitoring Systems prevent unexpected downtime caused by sudden filter plugging.

The color coded panel lights on the controller give an instant status report on system power and on alarms for high vacuum and high water level in both filter separator bowls. The RMS controller is designed for use in applications where downtime is unacceptable & redundant filtration a necessity. The RMS will timely warn the operator to switch filters and keep heavy equipment and generators running at all times.

Learn how the RMS-60 controller is used with the SWK-2000 Dual Water Separator / Fuel Filter.

WATECT 550 is our next generation WaterSensor Alarm Module withtechnology based on a programmable micro-controller. The unique and proprietary measuring method eliminates electrolytic probe corrosion and works with common water probes and sensors.

The module is protected against reverse polarity, over-voltage, over-current and has safe recovery from power interruption. Its potential free versatile SPDT relay output controls N.O. and N.C. contacts up to 250V/3A. The compact, flanged housing is completely environmentally sealed and can be used in harsh environments.

There are two types of Algae-X spin-on fine filters available.

1. The standard 3, 10 or 25 micron fine filter.
2. The special 3 or 10 micron water block fine filter additionally removes emulsified water

Digital Flow Meters measure how much fuel has been treated with the ALGAE-X Mobile Tank Cleaner or Fuel Polishing Systems.

Rotor Sight Glasses are a visual flow indicator

Pressure & Vacuum gauges are for monitoring purposes. (e.g. to let you know when the filter needs to be changed)

The intake/suction hose used on the ALGAE-X Mobile Tank Cleaners is made of clear reinforced Poly-Wire PVC. The return hose is a high pressure and high quality fuel hose.

AXI Manifolds are made from durable, aircraft-grade, machined aluminum with a black anodized finish. These precision designed and manufactured manifolds are available for custom applications and specifications to control the flow of fuels. They are also available in a variety of materials such as plastic, aluminum and other metals with standard port sizes and valve cavities.

• Multiple hoses connected to one pump
• Can be mounted in any direction
• Mounting holes pre-drilled
• Petroleum safe Teflon seals
• Brass ball valves
• Black anodized body