MTC-HC150 | 150 GPM High Capacity Mobile Tank Cleaning System

Fuel Optimization and Fuel Conditioning - Mobile Fuel Tank Cleaning - MTC-HC150

MTC-HC 150 High Capacity Mobile Tank Cleaning Systems are used to clean fuel storage tanks and recondition, stabilize and decontaminate Diesel Fuel, Bio-Diesel, Light Oils and Hydraulic Fluids. They offer multi-phase tank cleaning, water & sludge removal and transfer of fuels between tanks to guarantee Optimal Fuel Quality at All Times.

Flow Rates	Adjustable: 15GPM to 150GPM (170 GPM under low pump load)
Primary Filter Bags	Two Carbon Steel Filter Vessels, Swing Covers with 3 eyebolts, Independent Parallel Installation -use either or both simultaneously, Uses Large Capacity 30” Bag Filters, Independent Vessel Drain Valves
Final Filtration	Carbon Steel Filter Vessel, Swing Covers with 3 eyebolts, Dedicated Parallel Installation, Uses 6” x 18” Filter elements
Final Filter Elements	Available filtration includes, Particulate, Water Block, and MicroGlass, from 1 to 30 Microns
Water Separator	RCM 3000, with Drain Valve, Purge Valve and Air Vent Valve
Fuel Conditioner	Dual ALGAE-X 5000 Fuel Conditioners
Smart Filtration Controller	AXI SFC-55HC, Monitors Vacuum, Pressure, and Water Accumulation
Speed Controller for Pump Motor	Lenze SMVector Frequency Inverter, Pump Flow Rate can be adjusted, from 15 GPM to 150 GPM, (170 GPM with low pump load)
Power Required Instrumentation	480V 50-60 Hz Three Phase 15A 230V 50-60 Hz Available Dual Vacuum Gauges & Switches on Primary Filters, Pressure Gauge & Switch On Final Filtration, AXI Watect Water Sensor On RCM
Pump	Positive Displacement Sliding Vane, 2.5 inch Ports
Ports	Inflow: 3 Inch ID Outflow: 2.5 Inch ID, Cam and Groove Connectors
Connectors	Cam and Groove with Caps
Hoses	3 Inch Full Vacuum Clear Suction Hose - 25 Ft. \| 2.5 Inch Reinforced Discharge Hose - 25 Ft. \| 2.5 Inch Skid Interconnect Hose - 10Ft.
Instrumentation & Automation	Vacuum gauges on primary filter Pressure gauge on pump discharge Pressure gauges on secondary filter AXI Watect 550 water sensor alarm module (optional)
Skids	Powder Coated Carbon Steel, 4-way Forklift Channels, Integrated 2” Leak Containment Pan with Drain, Two Skids: 36:” x 45”
Flow Meter Option	Digital Flow Meter 2 Inch Ports, Cam and Groove Connectors, Connects Between Discharge Hose and Skid
Wheels Option	Pneumatic Wheels - 8 Inch Diameter, two Fixed, two Castering Per Each Skid
Weight	1790 Lbs.

Please contact us for higher flow rate and custom engineered systems built to your specifications.

MTC-HC80 | 80 GPM High Capacity Mobile Tank Cleaning System

Fuel Optimization and Fuel Conditioning - Mobile Fuel Tank Cleaning - MTC-HC80

MTC-HC80 high capacity, mobile tank cleaning systems are used to recondition, stabilize, and decontaminate Diesel Fuel, Bio-Diesel, Light Oils and Hydraulic Fluids while cleaning tanks.

Flow Rates	80 gpm (364 l/m)
Primary Filter	Carbon Steel pre-fliter housing, quick release 3-bolt swing cover, drain valve & air vent, perforated SS strainer basket 9/64" (3.5mm) for use with filter bags (1 to 800 micron) or SS liner.
Filter Bags	Replaceable filter bags (1-800 micron)
Secondary Filter	Carbon Steel filter housing, quick release 3-bolt swing cover, drain valve & air vent.
Filter Elements	Fine filters 2-30 micron, water block filters 5, 10, 30 micron
Water Separator	RCM 1500 with drain valve & air vent
Fuel Conditioner	LG-X 4000
Smart Filtration Controller	SFC-55HC
Pump	2 HP self-priming centrifugal pump, 208-230v/60hz 20 amp or 230v/50hz, 2" ports (NPT), handles solids up to 3/8" (9mm), viton seal
Ports	One suction, multiple discharge & sample ports
Connectors	Cam & groove fittings and covers
Hoses	25' clear suction hose (ID 2" - OD 2.5") 25' discharge hose (ID 2" - OD 2.5")
Instrumentation & Automation	Vacuum gauges on primary filter Pressure gauge on pump discharge Pressure gauges on secondary filter AXI Watect 550 water sensor alarm module (optional)
Skid	Powder coated carbon steel, lifting eyes & forklift channels, drip tray with drain
Dimensions - LxWxH	36" x 45" x 58" (91 x 114 x 147cm)
Weight	563 lbs (255kg)

Please contact us for higher flow rate and custom engineered systems built to your specifications.

MTC-HC50 | Adjustable High Capacity Mobile Tank Cleaning System

Fuel Optimization and Fuel Conditioning - Mobile Fuel Tank Cleaning - MTC-HC50

MTC-HC50 high capacity, modular tank cleaning systems are used to recondition, stabilize, and decontaminate Diesel Fuel, Bio-Diesel, Light Oils and Hydraulic Fluids.

Please contact us for higher flow rate and custom engineered systems built to your specifications.

Flow Rates	Adjustable from 25-75 gpm (95-284 l/m)
Primary Filter	Carbon Steel pre-fliter housing, quick release 3-bolt swing cover, drain valve & air vent, perforated ss strainer basket 9/64" (3.5mm) for use with filter bags (1 to 800 micron)
Secondary Filter	Carbon Steel filter housing, quick release 3-bolt swing cover, drain valve & air vent with 2 - 30 micron fine filter, 5 - 30 micron water block
Water Separator	RCM 1500 with drain valve & air vent
Fuel Conditioner	LG-X 4000
Smart Filtration Controller	SFC-50MTC (optional)
Pump	Adjustable Flow Rate, air driven, double-diaphram pump, handles solids up to 1/4" (6.4 mm)
Air Requirements	50 gpm - 25 cfm @ 90psi 75 gpm - 50 cfm @ 90psi 1/2" air hose connection
Ports	One suction, multiple discharge & sample ports
Connectors	Cam & groove fittings and covers
Hoses	25' clear suction hose (ID 2" - OD 2.5") 25' discharge hose (ID 2" - OD 2.5")
Instrumentation & Automation	Vacuum gauges on primary filter Pressure gauge on pump discharge Pressure gauges on secondary filter AXI Watect 550 water sensor alarm module (optional)
Skid	Powder coated carbon steel, lifting eyes & forklift channels, drip tray with drain
Dimensions - LxWxH	36" x 45" x 58" (91 x 114 x 147cm)
Weight	˜500 lbs (227kg)

MTC-3000 | 1560 GPH Mobile Tank Cleaning System

Fuel Optimization and Fuel Conditioning - Mobile Fuel Tank Cleaning - MTC-3000

MTC-3000 Systems clean tanks and restore fuel to its pristine condition while hardly using any consumables and without having to enter the tank.

Flow Rates	1560 gph (5905 lph)
Separator	Maintenance free centrifugal water separator / coalescer
Spin-on Final Filter	3, 10, or 25 micron fine filter - 3 or 10 micron water block
Fuel Conditioner	LG-X 3000
Pump	Self priming rotary vane pump with integrated bypass valve & strainer
Power	115v / 60Hz 20 amp or 230v / 50Hz 20 amp
Ports / Quick Disconnect	1-1/2" In - 1-1/4" Out - Cam & Groove
Clear Suction Hose	1-1/2", 25'
Discharge Hose	1-1/4", 25'
Dim. (HxWxD)	48" x 25.5" x 25" (122 x 65 x 64cm)
Weight	200 lbs (91 kg)

MTC-1000 LX | 900 GPH Mobile Tank Cleaning System

Fuel Optimization and Fuel Conditioning - Mobile Fuel Tank Cleaning - MTC-1000 LX

The MTC-1000 LX model is a new version of the 1000 mode featuring all stainless steel plumbing with cam & groove connectors and caps for the hoses.

Flow Rates	900 gph (3600 lph)
Separator	Maintenance free centrifugal water separator / coalescer
Spin-on Final Filter	3, 10, or 25 micron fine filter - 3 or 10 micron water block
Fuel Conditioner	LG-X 3000
Pump	Self priming rotary vane pump with integrated bypass valve & strainer
Power	115v / 60Hz 20 amp or 230v / 50Hz 20 amp
Ports	1" In - 1" Out - Cam & Groove
Clear Suction Hose	1", 25'
Discharge Hose	1", 25'
Dim. (HxWxD)	48" x 25.5" x 25" (122 x 65 x 64cm)
Weight	160 lbs (73 kg)

MTC-1000 | 900 GPH Mobile Tank Cleaning System

Fuel Optimization and Fuel Conditioning - Mobile Fuel Tank Cleaning - MTC-1000

The MTC 1000 is our most versatile original industrial work horse. We know of several AXI Service Companies who have used their MTC-1000 with a continuing service history of over five years and over a million gallons of processed fuel.

Flow Rates	900 gph (3600 lph)
Separator	Maintenance free centrifugal water separator / coalescer
Spin-on Final Filter	1, 3, 10, or 25 micron fine filter - 3 or 10 micron water block
Fuel Conditioner	LG-X 3000
Pump	Self priming rotary vane pump with integrated bypass valve & strainer
Power	115v / 60Hz 20 amp or 230v / 50Hz 20 amp
Ports / Quick Disconnect	1" In - 1" Out - Quick Disconnect
Clear Suction Hose	1", 25'
Discharge Hose	1", 25'
Dim. (HxWxD)	48" x 25.5" x 25" (122 x 65 x 64cm)
Weight	160 lbs (73 kg)

MTC-500 AFR | Adjustible Flow Mobile Tank Cleaning System

Fuel optimization and Fuel Conditioning - Mobile Fuel Tank Cleaning System - MTC-500 AFR

The MTC 500-AFR - adjustable flow rate - is equipped with a variable speed drive making this system suitable for a wide range of tanks and applications.

Flow Rates	180-480 gph
Separator	Maintenance-free, centrifugal water separator / coalescer
Spin-on Filter	1, 3, 10 or 25 micron fine filter - 3 or 10 micron water block
Fuel Conditioner	LG-X 1500
Pump	Self priming gear pump with variable speed drive
Power	115v / 60hz or 230v / 50hz 15 amp
Ports / Quick Disconnect	1" in - 3/4" out - Quick Disconnect
Clear Suction Hose	3/4", 25'
Discharge Hose	3/4", 25'
Dim. (HxWxD)	48" x 25.5" x 25" (122 x 65 x 64cm)
Weight	150 lbs (68 kg)

MTC-500 | 480 GPH Mobile Tank Cleaning System

Fuel optimization and Fuel Conditioning - Mobile Fuel Tank Cleaning System - MTC-500

MTC-500 Systems clean tanks and restore fuel to its pristine condition while hardly using any consumables and without having to enter the tank.

Flow Rates	480 gph (1500 lph)
Separator	Maintenance-free, centrifugal water separator / coalescer
Spin-on Filter	1, 3, 10 or 25 micron fine filter - 3 or 10 micron water block
Fuel Conditioner	LG-X 1500
Pump	Self priming rotary vane pump with integrated adjustable bypass valve
Power	115v / 60hz or 230v / 50hz 15 amp
Ports / Quick Disconnect	1" in - 3/4" out - Quick Disconnect
Clear Suction Hose	1" (oil) or 3/4" (diesel only), 25'
Discharge Hose	3/4", 25'
Dim. (HxWxD)	48" x 25.5" x 25" (122 x 65 x 64cm)
Weight	140 lbs (65 kg)

TK 240-XT | 240 GPH Mobile Tank Cleaning System

The TK 240-XT is a compact and completely ready to go system for cleaning tanks, polishing & transferring diesel fuel, light oil, coolants, hydraulic and other fluids. It is a perfect addition to every service technician’s tool box.

Ideal for fuel maintenance & tank cleaning when servicing generators, trucks, buses, vessels, agricultural/ mining and other heavy equipment.

Series	TK 240-XT
Flow Rates	240 gph (908 lpm)
Port Size	1/2"
Power	12v 10A
Weight	26 lbs (12 kg)
Dim. (HxWxD)	13" x 12" x 12" 33 x 30 x 30cm
Fuel Conditioner	LG-X 500
Strainer / Primary Filter	40, 80 Mesh SS Screen or 10 Micron Particulate
Secondary Filter	15 Micron Waterblock

Find the right solution for you

"Algae" in diesel fuel refers to the organic debris, sometimes called sluge or mud, that naturally forms in the bottom of fuel tanks, representing about 90% of all contaminants found in fuels and oil. This "algae" causes a range of engine problems including:

fuel injector damage
clogged filters
engine shut-down
loss of power
poor fuel economy
excessive smoke
toxic fumes
loss of reliability

If you're experiencing any of these problems, there are a variety of solutions available.

Find the right solution for you:

Fuel Additives
Automated Fuel Filtration Systems for Storage Tanks for Power Generation
Fuel Polishing Systems for Commercial & Recreational Marine, Telecom and Stand-Alone Systems
ALGAE-X In-Line Fuel Conditioners for Heavy Equipment, Trucking, Mining and Transit
Mobile Tank Cleaners for occasional use and service providers

See also: AXI Helpful Articles
To diagnose the problem, call for a FREE Consultation, toll free 1-877-425-4239 or click below to E-mail a Regional Sales Manager in your area.